GIMP is out from Lucid Lynx.
Written by hellmet the 20 Nov 09 at 18:49.
Won't implement
GIMP is being taken off the default install due to "CD space" problems. However, it should remain easily accessible/installable.
-450
votes
67
31
517
-45
votes
236
75
281
Solution #2:
not remove gimp
easy, do not remove gimp from live CD, some users, like me, can't connect to Internet so easily
easy, do not remove gimp from live CD, some users, like me, can't connect to Internet so easily
146
votes
308
56
162
Solution #3:
Remove the help files
Written by
Glennz the 20 Nov 09 at 20:46.
Removing the help files from gimp will already make the cd smaller.
I have heard from various people it would make the cd about 20 mb smaller just by removing gimp help files.
Removing the help files from gimp will already make the cd smaller.
I have heard from various people it would make the cd about 20 mb smaller just by removing gimp help files.
409
votes
541
33
132
Solution #4:
Remove GIMP and let users install it as needed
Written by
pwnedd the 21 Nov 09 at 10:41.
It's a great application and I use it a lot, but it's not for everyone. A simple photo-editor with things like rescaling and "remove red-eye" is probably enough for many people. Also, it's not too difficult to install GIMP once your system in installed :)
It's a great application and I use it a lot, but it's not for everyone. A simple photo-editor with things like rescaling and "remove red-eye" is probably enough for many people. Also, it's not too difficult to install GIMP once your system in installed :)
550
votes
666
26
116
Solution #5:
give a simple paint app
Written by
yzarc the 21 Nov 09 at 14:37.
Very often I just wanna draw an arrow over a map and write "the party is here!". Or just crop a picture.
And it's a pain to do it in gimp. It's like operate war tank to kill an ant. Please give us a simple image editor, no layers, no vectors, no Filters, etc. Try to remember the first time you opened the gimp. What do I do with all these windows and tools?
Very often I just wanna draw an arrow over a map and write "the party is here!". Or just crop a picture.
And it's a pain to do it in gimp. It's like operate war tank to kill an ant. Please give us a simple image editor, no layers, no vectors, no Filters, etc. Try to remember the first time you opened the gimp. What do I do with all these windows and tools?
341
votes
460
28
119
Solution #6:
Add an applications section to the installer
Written by
tehalynn the 21 Nov 09 at 23:31.
When someone installs Ubuntu, they are shown an applications page with the following options:
1. Install all default applications. Some will need to be downloaded.
2. Install only default applications that do not need to be downloaded.
3. Select which applications to install.
Option 1 will install applications that are not on the CD, such as GIMP, by downloading and installing them when an internet connection is made.
Option 2 will install only applications on the CD. It should tell the user how to get them later if they change their mind.
Option 3 shows a page listing applications that will be installed. The user can exclude applications they do not want, and include ones they do. Here's a mockup of the general idea:
Only major applications need to be mentioned here. This is not a replacement for Ubuntu Software Center/Synaptic.
When someone installs Ubuntu, they are shown an applications page with the following options:
1. Install all default applications. Some will need to be downloaded.
2. Install only default applications that do not need to be downloaded.
3. Select which applications to install.
Option 1 will install applications that are not on the CD, such as GIMP, by downloading and installing them when an internet connection is made.
Option 2 will install only applications on the CD. It should tell the user how to get them later if they change their mind.
Option 3 shows a page listing applications that will be installed. The user can exclude applications they do not want, and include ones they do. Here's a mockup of the general idea:
<img src="http://farm3.static.flickr.com/2611/4122630225_ea11d66d12_o.png" />
Only major applications need to be mentioned here. This is not a replacement for Ubuntu Software Center/Synaptic.
-165
votes
82
30
247
Solution #7:
Remove less useful stuff.
Written by
Uncle TK the 22 Nov 09 at 12:11.
As for me GIMP is much more useful for common user than f.e. Bluez or Transmission and many other stuff. Maybe it's a good idea to reserve GIMP instead of them?
As for me GIMP is much more useful for common user than f.e. Bluez or Transmission and many other stuff. Maybe it's a good idea to reserve GIMP instead of them?
-117
votes
51
12
168
Solution #8:
first run
Written by
nloewen the 23 Nov 09 at 05:02.
At the first boot of the system after install, a dialog box could pop up asking if the user would like some help setting up there system. It could go through users and what not as well as ask what the user would like to use there computer for. if they select something like photo editing or replacement for photo-shop, the program would select GIMP for install with a button to let them select a different program from the repository.
At the first boot of the system after install, a dialog box could pop up asking if the user would like some help setting up there system. It could go through users and what not as well as ask what the user would like to use there computer for. if they select something like photo editing or replacement for photo-shop, the program would select GIMP for install with a button to let them select a different program from the repository.
-49
votes
151
24
200
Solution #9:
Move from CD to DVD (USB) release
Written by
Bobik-s the 23 Nov 09 at 11:36.
Lucid Lynx will be ready at 2010. Who cares about ancient CDs? Ubuntu distro should be DVD- or USB-based. Even if you remove GIMP the problem of 700Mb capacity is still unresolved.
Lucid Lynx will be ready at 2010. Who cares about ancient CDs? Ubuntu distro should be DVD- or USB-based. Even if you remove GIMP the problem of 700Mb capacity is still unresolved.
-123
votes
78
22
201
Solution #10:
Offer Multiple ISO downloads
CD-Rs come in packs more often than not.
Offer for download in ISO format a two disc system with just Ubuntu on the first disc and extra applications on the second disc. This would possibly be in addition to the standard one disc system.
This way, users can save both discs for when they need to reinstall software that came with the system, but are offline.
Besides, using two discs frees up space for more software to be included with ubuntu by default.
ps: Don't forget to give users a choice of which applications to install from the second disc.
CD-Rs come in packs more often than not.
Offer for download in ISO format a two disc system with just Ubuntu on the first disc and extra applications on the second disc. This would possibly be in addition to the standard one disc system.
This way, users can save both discs for when they need to reinstall software that came with the system, but are offline.
Besides, using two discs frees up space for more software to be included with ubuntu by default.
ps: Don't forget to give users a choice of which applications to install from the second disc.
176
votes
218
26
42
Solution #11:
Use better compression algorithm for packages
Written by
10110111 the 25 Nov 09 at 13:53.
There should exist some better compression algorithms. Just use some of them instead of the one which is used now for packages.
There should exist some better compression algorithms. Just use some of them instead of the one which is used now for packages.
242
votes
283
15
41
Solution #12:
Atleast include it in the dvd
Written by
shinjan the 25 Nov 09 at 14:33.
Gimp is a very useful package...it's not at all worth removal due to space problems. If not in the cd atleast include in the dvd version of ubuntu..
Gimp is a very useful package...it's not at all worth removal due to space problems. If not in the cd atleast include in the dvd version of ubuntu..
-285
votes
24
20
309
Solution #13:
OpenOffice
Written by
argento the 25 Nov 09 at 15:43.
Just use OpenOffice Draw to do simple painting
Just use OpenOffice Draw to do simple painting
-197
votes
53
19
250
Solution #14:
Remove every internet related application.
This is a mix of previous solutions, but what I propose is to remove basically everything on "Internet" menu but Firefox.
Why?, because people that need those internet related apps do *have* internet to use them, therefore they can download & install them in an easy one-click install process like described in #1.
That is, to remove by default:
-Transmission
-Pidgin/Empathy/Ekiga
-Terminal Server Client
-Evolution
-Ubuntu One
I mean, common, those are needed only if you have Internet, so they can be pulled & installed on first use.
This is a mix of previous solutions, but what I propose is to remove basically everything on "Internet" menu but Firefox.
Why?, because people that need those internet related apps do *have* internet to use them, therefore they can download & install them in an easy one-click install process like described in #1.
That is, to remove by default:
-Transmission
-Pidgin/Empathy/Ekiga
-Terminal Server Client
-Evolution
-Ubuntu One
I mean, common, those are needed only if you have Internet, so they can be pulled & installed on first use.
429
votes
446
7
17
Solution #15:
Software Center should have a "recommended Software" section
Written by
Umang the 26 Nov 09 at 12:59.
The software center should have a "Recommended Software" section where programs such as Thunderbird and GIMP are offered for downloading.
New users are flooded with too many packages to actually get a taste of the best FOSS can provide them. This section should be some sort of an exclusive section and only stable and very popular software should be included.
The software center should have a "Recommended Software" section where programs such as Thunderbird and GIMP are offered for downloading.
New users are flooded with too many packages to actually get a taste of the best FOSS can provide them. This section should be some sort of an exclusive section and only stable and very popular software should be included.
153
votes
194
12
41
Solution #17:
Even windows comes with paint...
Written by
vexorian the 26 Nov 09 at 14:30.
How am I going to do anything with the live CD when I need graphics? No, I don't want to tweak a photo...
At least include tuxpaint or something like that for god's sake.
I guess I would just have to switch to a distro with a functional live CD instead...
How am I going to do anything with the live CD when I need graphics? No, I don't want to tweak a photo...
At least include tuxpaint or something like that for god's sake.
I guess I would just have to switch to a distro with a functional live CD instead...
-72
votes
55
36
127
Solution #18:
Include KolourPaint instead of GIMP
Written by
8bit the 27 Nov 09 at 07:34.
The thing missing from Ubuntu is a simple, MS Paint-like program. These are nice in that they are easy to learn, run smoothly on low end system, lack clutter, have small install footprints, and open up seemingly instantly. KolourPaint is all of these:
Pros:
-The design is good. It doesn't feel cramped, it feels uniform and inviting, and most of the button icons are self-explainable. It basically looks like a prettier, shinier pre-Windows 7 MS Paint.
-It functions almost identically to MS Paint. A casual Windows user likely wouldn't be able to notice the difference, and the time it would take to transition would be minimal
-Start up time is fast
-All features that are in KolourPaint and not in MS Paint are pretty useful, and in no way get in the way of the MS Paint-like features.
-The undo history is huge. Where as MS Paint only allows 2 undos, I've gone back hundreds of actions and still haven't hit a wall
-Anything that's been changed from MS Paint has been changed for the better. Zoom is more powerful, the eraser has more brush sizes, the shape tools let you choose line thickness from within their tool box, and don't require you to switch to the line tool to choose line thickness.
-It's pretty stable. I had a weird hangup when using the zoom tool once, but I haven't been able to reproduce it since, and gPaint, on the other hand, crashes whenever I click on the 'fill' tool.
-As I mentioned, there are a couple of original tools- The connected lines tool, the color eraser tool, the freeform selection tool, but the most interesting addition is the Color Similarity tool which allows a user to set selection threshold for the fill tool. (and other tools, presumably) What this means is that you can have two, very similar colors, set this setting to something high, and then use the fill tool on one, and it will fill two. This is very useful, and is somewhat analogous to the magic wand tool/color select.
-Supports saving in a multitude of files.
-Supports editing in a multitude of files. (including XCF)
-Sort of has support for transparency (THIS IS AWESOME!)
-Only just over 2MB in size, as compared to GIMP's 14MB
-Everything is in one window. I quite like this.
-Free and open source. Uses the BSD license.
-It's being actively developed.
Cons:
-No layering support
-Very limited transparency support. While transparency itself is supported, translucency isn't, so you can't have an image with parts that are sort of transparent. It's either completely transparency, or completely opaque.
-No transparency for the tools. This seems obvious considering the above. You can't set transparency levels for, say, the paintbrush, for example.
-There's an uneven number of tools, meaning that there is a space where an icon could go which is empty. (Not a big deal at all.)
-The 'fill' tool isn't a paint bucket, so it may be confusing for a half a second, but the icon makes sense, and is more elegant than a paint bucket.
-The color picker icon looks like a safety pin to me, which was confusing at first.
-When you pull on the edge of the canvas to enlarge it, it doesn't resize in real time. Instead, it shows you a selection box sort of thing. (MS Paint does this in real time.) This is incredibly knit-picky. 99% of people wouldn't even notice this, I don't really care, some might even prefer it.
-Does not support saving in XCF format.
-It ate up my processor once, forcing me to restart my whole system, once. I've tried pretty hard, though, and I haven't been able to show the issue again. It's entirely possible it was another piece of software I was running. Other than that, it runs completely smooth.
-On a live CD 2MB can still be substantial, but it's definitely an improvement over 14.
-The color swatches bar takes up a little bit too much vertical space in my opinion. Why can't the color profile be on the right side, rather than above? There's all that extra horizontal space, afterall.
In conclusion, the cons are either extremely knit-picky, or exist in similar programs, such as gPaint and MS Paint, anyway. KolourPaint seems perfect for the live CD as a lightweight, Paint-like program. I highly recommend it.
GIMP, on the other hand, is just too large for Live CDs, too unweildly for casual users, and really easy to get for anyone who actually needs it.
The thing missing from Ubuntu is a simple, MS Paint-like program. These are nice in that they are easy to learn, run smoothly on low end system, lack clutter, have small install footprints, and open up seemingly instantly. KolourPaint is all of these:
Pros:
-The design is good. It doesn't feel cramped, it feels uniform and inviting, and most of the button icons are self-explainable. It basically looks like a prettier, shinier pre-Windows 7 MS Paint.
-It functions almost identically to MS Paint. A casual Windows user likely wouldn't be able to notice the difference, and the time it would take to transition would be minimal
-Start up time is fast
-All features that are in KolourPaint and not in MS Paint are pretty useful, and in no way get in the way of the MS Paint-like features.
-The undo history is huge. Where as MS Paint only allows 2 undos, I've gone back hundreds of actions and still haven't hit a wall
-Anything that's been changed from MS Paint has been changed for the better. Zoom is more powerful, the eraser has more brush sizes, the shape tools let you choose line thickness from within their tool box, and don't require you to switch to the line tool to choose line thickness.
-It's pretty stable. I had a weird hangup when using the zoom tool once, but I haven't been able to reproduce it since, and gPaint, on the other hand, crashes whenever I click on the 'fill' tool.
-As I mentioned, there are a couple of original tools- The connected lines tool, the color eraser tool, the freeform selection tool, but the most interesting addition is the Color Similarity tool which allows a user to set selection threshold for the fill tool. (and other tools, presumably) What this means is that you can have two, very similar colors, set this setting to something high, and then use the fill tool on one, and it will fill two. This is very useful, and is somewhat analogous to the magic wand tool/color select.
-Supports saving in a multitude of files.
-Supports editing in a multitude of files. (including XCF)
-Sort of has support for transparency (THIS IS AWESOME!)
-Only just over 2MB in size, as compared to GIMP's 14MB
-Everything is in one window. I quite like this.
-Free and open source. Uses the BSD license.
-It's being actively developed.
Cons:
-No layering support
-Very limited transparency support. While transparency itself is supported, translucency isn't, so you can't have an image with parts that are sort of transparent. It's either completely transparency, or completely opaque.
-No transparency for the tools. This seems obvious considering the above. You can't set transparency levels for, say, the paintbrush, for example.
-There's an uneven number of tools, meaning that there is a space where an icon could go which is empty. (Not a big deal at all.)
-The 'fill' tool isn't a paint bucket, so it may be confusing for a half a second, but the icon makes sense, and is more elegant than a paint bucket.
-The color picker icon looks like a safety pin to me, which was confusing at first.
-When you pull on the edge of the canvas to enlarge it, it doesn't resize in real time. Instead, it shows you a selection box sort of thing. (MS Paint does this in real time.) This is incredibly knit-picky. 99% of people wouldn't even notice this, I don't really care, some might even prefer it.
-Does not support saving in XCF format.
-It ate up my processor once, forcing me to restart my whole system, once. I've tried pretty hard, though, and I haven't been able to show the issue again. It's entirely possible it was another piece of software I was running. Other than that, it runs completely smooth.
-On a live CD 2MB can still be substantial, but it's definitely an improvement over 14.
-The color swatches bar takes up a little bit too much vertical space in my opinion. Why can't the color profile be on the right side, rather than above? There's all that extra horizontal space, afterall.
In conclusion, the cons are either extremely knit-picky, or exist in similar programs, such as gPaint and MS Paint, anyway. KolourPaint seems perfect for the live CD as a lightweight, Paint-like program. I highly recommend it.
GIMP, on the other hand, is just too large for Live CDs, too unweildly for casual users, and really easy to get for anyone who actually needs it.
127
votes
145
8
18
Solution #19:
Ubuntu App Collections
Written by
8bit the 27 Nov 09 at 07:41.
Mozilla has a section of their Firefox add-ons site dedicated to Add-on Collections. These are collections of add-ons handpicked by developers for different uses, (Web developer, family, etc..) which can be downloaded and installed with a single click. Implement a similar section for full applications in the AppCenter. Have one for artists, one for web developers, one for gamers, etc...
Mozilla has a section of their Firefox add-ons site dedicated to Add-on Collections. These are collections of add-ons handpicked by developers for different uses, (Web developer, family, etc..) which can be downloaded and installed with a single click. Implement a similar section for full applications in the AppCenter. Have one for artists, one for web developers, one for gamers, etc...
-36
votes
15
18
51
Solution #20:
Solution #10 Revised.
I think it might have been the double ISO thing that ruined it. Lemme try again.
Offer Ubuntu for download one one disk. This will save download time, and installation time.
Forget the second disk. I was trying to imply the second disk would be optional, or even nonexistent.
Why would anybody want to backup their software anyway? (sarcasm)
I think it might have been the double ISO thing that ruined it. Lemme try again.
Offer Ubuntu for download one one disk. This will save download time, and installation time.
Forget the second disk. I was trying to imply the second disk would be optional, or even nonexistent.
Why would anybody want to backup their software anyway? (sarcasm)
24
votes
49
14
25
Solution #21:
Give a high-compressed archive and application
Written by
Kwpolska the 29 Nov 09 at 13:37.
Add, like solution 1, small installer, like Firefox on Kubuntu 9.10, but he will decompress highly compressed archive (it can be archive in archive model) and make installer decompress DEB's in it and install it.
Add, like solution 1, small installer, like Firefox on Kubuntu 9.10, but he will decompress highly compressed archive (it can be archive in archive model) and make installer decompress DEB's in it and install it.
16
votes
33
9
17
Solution #22:
Like Solution #19, but have it where any user can suggest applications
Written by
aubre the 30 Nov 09 at 18:12.
Allow users to submit lists of applications that they like to have on their machines, have them assigned a "collection name" and then give users the option of either browsing the lists or searching for the list name (perhaps they already know the list they want to install).
An example is perhaps an academic lab manager has certain applications they install on each machine. They make a list, submit it to Ubuntu, and then as they install new machines they can simply input the name and all the packages they need will be pre-selected for them. Even better, an academic lab manager on the other side of the world can browse the list, find this pre-built list, and either use it unchanged or adapt it as a starting point of their own list.
There are text/CLI ways to do these things but it would be nice if it could be incorporated into the graphical install interface.
Allow users to submit lists of applications that they like to have on their machines, have them assigned a "collection name" and then give users the option of either browsing the lists or searching for the list name (perhaps they already know the list they want to install).
An example is perhaps an academic lab manager has certain applications they install on each machine. They make a list, submit it to Ubuntu, and then as they install new machines they can simply input the name and all the packages they need will be pre-selected for them. Even better, an academic lab manager on the other side of the world can browse the list, find this pre-built list, and either use it unchanged or adapt it as a starting point of their own list.
There are text/CLI ways to do these things but it would be nice if it could be incorporated into the graphical install interface.
26
votes
52
17
26
Solution #23:
Give OpenOffice-Draw an icon
Written by
snadrus the 1 Dec 09 at 21:50.
It's already installed. It's a vector graphics program which usually better fits the "just sketch something" mindset since things you drew are layered instead of lost. Lets just see an icon for it.
Try it out from the command line: ooffice -draw
It's already installed. It's a vector graphics program which usually better fits the "just sketch something" mindset since things you drew are layered instead of lost. Lets just see an icon for it.
Try it out from the command line: ooffice -draw
-26
votes
29
9
55
Solution #24:
Remove something other
GIMP is a very useful program, and Ubuntu contains lots of less useful software. I think a very little number of people use Ekiga, Terminal Server client and remote desktop application. It is better to remove them and don't remove GIMP.
GIMP is a very useful program, and Ubuntu contains lots of less useful software. I think a very little number of people use Ekiga, Terminal Server client and remote desktop application. It is better to remove them and don't remove GIMP.
-151
votes
11
1
162
Solution #25:
Install Wine, the MS .net framework and use paint.net under Wine
If only we could add a java layer!
If only we could add a java layer!
53
votes
80
11
27
Solution #26:
Gimp Light (a easy and not so messy Version of Gimp)
Written by
account the 5 Dec 09 at 13:54.
The newest Gimp is a single-window-Application. The source is open. So I propose to take that source, delete all what is not really necessary and create by this way a simpler Version of Gimp. I call it Gimp-Light and I think it's a great idea. So peoples can accustoms the feel of Gimp, but without the messy feel of the normal Version of Gimp. If they needs more, they can install the regular Gimp. The Gimp-Light shouldn't have many functions - only basic ones for painting etc. This will reduce the weight of this application and can be shipped also in the CD-Version of Ubuntu without problems. A paint-application can stay also in the whole amount of the packages! What you think about my idea!?
The newest Gimp is a single-window-Application. The source is open. So I propose to take that source, delete all what is not really necessary and create by this way a simpler Version of Gimp. I call it Gimp-Light and I think it's a great idea. So peoples can accustoms the feel of Gimp, but without the messy feel of the normal Version of Gimp. If they needs more, they can install the regular Gimp. The Gimp-Light shouldn't have many functions - only basic ones for painting etc. This will reduce the weight of this application and can be shipped also in the CD-Version of Ubuntu without problems. A paint-application can stay also in the whole amount of the packages! What you think about my idea!?
-47
votes
32
11
79
Solution #27:
Ubuntu paint
Written by
Glennz the 6 Dec 09 at 18:38.
Let Canonical develop an easy but usefull simple paint app.
Like gnome paint.
Let Canonical develop an easy but usefull simple paint app.
Like gnome paint.
-11
votes
26
9
37
Solution #28:
Remove extra stuffs or compress less used with paq
Written by
DrG the 7 Dec 09 at 08:36.
Remove some of the
Games totalling > 3.0 MB
Backgrounds 9.5 MB ( replace high detailed ones with less detailed ( ie. more compressible to the sqashfs ) ,but eye candy ones.
Themes 1.4 MB - ( remove some ugly ones )
Sounds 3.1 MB - these can be replaced by symbolic format sound ( which takes very little space )
Screen Savers
And such similar items
( choose only a few of these items by voting )
------
or
compress the less used one with paq8px
Example - in karmic , when Shoes.jpg was compressed with paq806 -6 the size was reduced to 802.3 kb from 1016 kb.
( lzma , which is used in the Karmic CD squashfs is not able to reduce the size )
For more informations on compression
http://www.maximumcompression.com/data/summary_sf.php
----
To make space for GIMP or GIMPShop
Remove some of the
Games totalling > 3.0 MB
Backgrounds 9.5 MB ( replace high detailed ones with less detailed ( ie. more compressible to the sqashfs ) ,but eye candy ones.
Themes 1.4 MB - ( remove some ugly ones )
Sounds 3.1 MB - these can be replaced by symbolic format sound ( which takes very little space )
Screen Savers
And such similar items
( choose only a few of these items by voting )
------
or
compress the less used one with paq8px
Example - in karmic , when Shoes.jpg was compressed with paq806 -6 the size was reduced to 802.3 kb from 1016 kb.
( lzma , which is used in the Karmic CD squashfs is not able to reduce the size )
For more informations on compression
http://www.maximumcompression.com/data/summary_sf.php
----
To make space for GIMP or GIMPShop
19
votes
42
11
23
Solution #29:
Make a highly compressed disk image.
Rather then having a lot of .deb packages, the install CD should have a disk image that is just decompressed to the selected partition.
It should be possible to do a lot more compression on a disk image then on deb packages.
Also this should make install much faster.
Rather then having a lot of .deb packages, the install CD should have a disk image that is just decompressed to the selected partition.
It should be possible to do a lot more compression on a disk image then on deb packages.
Also this should make install much faster.
38
votes
51
13
13
Solution #30:
Make 'Ubuntu Studio' service
Written by
DrG the 7 Dec 09 at 10:54.
A 'Ubuntu Studio' service - like openSuse Studio (
http://susestudio.com/ ).
Which allow users to customize their distro from top to bottom.
A 'Ubuntu Studio' service - like openSuse Studio ( http://susestudio.com/ ).
Which allow users to customize their distro from top to bottom.
-6
votes
30
6
36
Solution #31:
Do not remove Gimp from LIVECD experience
Written by
robang74 the 11 Dec 09 at 00:28.
Removing gimp means it would be not available in live-cd experience. I think people who want to try Ubuntu before installing it would appreciate an image editor like gimp.
Remove some help package instead which usually people download in their own language.
Removing gimp means it would be not available in live-cd experience. I think people who want to try Ubuntu before installing it would appreciate an image editor like gimp.
Remove some help package instead which usually people download in their own language.
-27
votes
4
3
31
Solution #32:
Develop www.phofiltre-lx.org an include in in Lucid Lynx
Written by
walo the 12 Dec 09 at 16:56.
¿Haven't you used photofiltre fow windows?
This is one of the best free and useful image tools i have ever used.
Photo filtre LX (
http://www.photofiltre-lx.org/) was created to have this simple but really useful aplication under GNU/Linux. I think this develop needs to be released as soon as posible in order to replace GIMP or to have other SIMPLE image manipulation program.
It's going to ve developed using C++ and imagemagic library
¿Haven't you used photofiltre fow windows?
This is one of the best free and useful image tools i have ever used.
Photo filtre LX (http://www.photofiltre-lx.org/) was created to have this simple but really useful aplication under GNU/Linux. I think this develop needs to be released as soon as posible in order to replace GIMP or to have other SIMPLE image manipulation program.
It's going to ve developed using C++ and imagemagic library
42
votes
57
3
15
Solution #33:
Recover some space by dropping Mono
Written by
KiloByte the 12 Dec 09 at 18:51.
Gimp is one of more important programs, certainly more important than junk like Tomboy Notes, which takes >50MB -- _and_ there's a port of Tomboy to C++ called gnote. Replace it with that port, and there goes non-free Mono. The space savings would let us have Gimp and a bunch of other stuff.
Gimp is one of more important programs, certainly more important than junk like Tomboy Notes, which takes >50MB -- _and_ there's a port of Tomboy to C++ called gnote. Replace it with that port, and there goes non-free Mono. The space savings would let us have Gimp and a bunch of other stuff.
-10
votes
8
8
18
Solution #34:
An additional CD to install GIMP, Inkspace and another applications
Written by
tiagoscd the 16 Dec 09 at 10:41.
The additional CD with various popular applications.
This CD can be added as a repository and have an "special" option on Software Center.
The additional CD with various popular applications.
This CD can be added as a repository and have an "special" option on Software Center.
9
votes
18
3
9
Solution #35:
Use a more efficient compression algorithm
Written by
dant1612 the 18 Dec 09 at 02:50.
use the xz utils package to compress the files instead, the author claims that it produces archives up to 30% smaller than gzip (although decompression speed would probably be sacrificed)
http://tukaani.org/xz/
(Its still in beta, but I've noticed quite a few GNU programs have started providing source packages in the .xz format)
use the xz utils package to compress the files instead, the author claims that it produces archives up to 30% smaller than gzip (although decompression speed would probably be sacrificed)
http://tukaani.org/xz/
(Its still in beta, but I've noticed quite a few GNU programs have started providing source packages in the .xz format)
5
votes
8
2
3
Solution #36:
Use a lighter solution for simple things
Use a GIMP lighter solution/version for simple things (like crop, rotate..), and the user that need more options can install the full version of GIMP.
Use a GIMP lighter solution/version for simple things (like crop, rotate..), and the user that need more options can install the full version of GIMP.
4
votes
5
0
1
Solution #37:
Let the user compose their own CD from selectable components
Written by
10110111 the 7 Mar 10 at 13:08.
Make a program which would let the user select the needed packages (or use defaults like official Ubuntu compilation, Kubuntu, etc.), which then would be fetched from the repos and packed into a bootable CD/DVD image.
And leave the official CD as its maintainers want (including removal of some packages like GIMP).
Edit: hmm... it's sorta dup of #30...
Make a program which would let the user select the needed packages (or use defaults like official Ubuntu compilation, Kubuntu, etc.), which then would be fetched from the repos and packed into a bootable CD/DVD image.
And leave the official CD as its maintainers want (including removal of some packages like GIMP).
Edit: hmm... it's sorta dup of #30...